pH 0-2.5 PLASTIC STRIPS [Moisture-Proof Vial of 100 Strips]
Remove the test strip, and shake off any excess liquid. Do not allow the test strip to dry before reading against the color chart.
Chlorophenol Red (CPR) 8 in x 10 in Test Paper Sheets [Pack of 24]
Chlorophenol red water leak detection paper dramatically indicates the presence of water with a bright red color. The water indicator paper sheets shown in the image are 8×10″ (200x250mm). The native color of the sheets is yellow & the wetted sections turn red to a deep purple (depending on the liquid’s pH) when exposed to liquid water.
High-level Peracetic Acid Test Strips, 0-500 ppm [Vial of 50 Strips]
This test strip is calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. Peracetic acid is another sanitizing agent primarily used in some segments of the food industry, such as organic produce and poultry. Instructions:Remove one test strip from the vial, being careful not to touch the test pad with your fingers.Dip the test strip into the solution to be tested for 2 seconds.Remove and shake off any excess liquid.Compare the test pad to the color chart after 10 seconds.
pH 1-14 Wide Range pH 3-Pad Test Strips [Bag of 50 Strips]
Remove one test strip by holding the end of the test strip between your index finger and thumb. Do not touch the test pad with your fingers. Compare the test pad to the color chart within 30 seconds.
pH 11.5-14 Test Strips [Bag of 50 Strips]
Remove one pH 11.5-14 test strip by holding one end of the strip between your index and thumb finger. Do not touch the test pad with your fingers. Compare to the color chart within 30 seconds. Do not allow the test strip to dry before reading against the color chart.
Universal pH Indicator 8×10″ Paper [24 Sheets] for Leak Detection
The native color of the sheets is orangish-yellow but changes at different pH levels due to the various indicators. This makes it useful as both a pH indicator & water leak detector. Universal pH paper reacts quickly to produce a permanent record of water leakage even where different pH levels may occur.
Cobalt Chloride Test Paper [Vial of 100 Strips] For Water, Moisture and Humidity
Our Cobalt Chloride test paper detects the presence of moisture. This test paper is useful in difficult to reach places and recesses. Cobalt chloride test paper is responsive to 50% relative humidity and above, and any direct measure of an aqueous solution. Quickly detect the presence of moistureIn a stoppered vial of 100 2″ stripsChanges From Blue (low humidity) to Pink (high humidity).Easy to useGreat for homes, labs, and science experimentsInstructions: Place the test strip or sheet near recesses or areas where there may be cracks/leaks.If moisture is present, the test paper will turn from blue to a light pink/white color.NOTE: Be sure to keep the strips sealed tightly in the vial, as exposure to 55 percent relative humidity or greater is sufficient enough to cause a slow color change. In addition, if the sheets are heated or the surrounding air dries, the paper will change back to its original blue color.
pH 10-13 Test Strips [Bag of 50 Strips]
This pH 10-13 test strip is a narrow range test for strong bases and highly alkaline materials with increments of .5 pH units.Instructions:Remove one pH 10-13 test strip from the bag, holding one end of the strip between your index finger and thumb. Do not touch the test pad with your fingers.Dip the test strip about 1/2″ into the solution to be tested for 1-2 seconds.Remove and shake off any excess liquid.Compare immediately to the color chart. Do not allow the test strip to dry before reading against the color chart.
Bartovation Chlorine Sanitizer Paper Test Strips, 10-200 ppm, 100-Pack
Tests in a range of 10-200 ppm (10, 50, 100 and 200 ppm markings). These are NOT for pool OR tap water tests. They ARE designed specifically for restaurants testing their chlorine sanitizers in 3 part sinks.
Bartovation Peracetic Acid Test Strips, 0-160 ppm, 300-Pack
For use in testing water for peracetic acid concentration in water.