Fructose, 1.5lb, Food Grade, Sturdy Bottles, SHIPS SAME DAY
Fructose has hundreds of uses. Our bottles are made of sturdy polypropylene. CAS Number. Fine Crystals. Chemical Formula.
Copper Sulfate, 5oz, General Purpose Grade, Sturdy Bottle SHIPS SAME DAY
15.00 Copper Sulfate CuSO4·5H2O Weight 5 Ounces Volume 4 Fluid Ounces Chemical Formula CuSO4·5H2O Purity Ultra-Pure 99.7% Grade Reagent/Feedstock Grade Consistency Fine Powder CAS Number 7758-99-8 You are purchasing 5 Ounces (by weight) of Copper Sulfate. The item ships in a 4 Fluid Ounce Polypropylene bottle. Copper Sulfate; also known as Copper Sulfate (Pentahydrate) / Cupric Sulfate / Copper (II) Sulfate / Copper Vitriol / Blue Vitriol / Blue Stone; has hundreds of uses. For more information, go to: http://en.wikipedia.org/wiki/Copper(II)_sulfate FREE EXPEDITED SHIPPING We ship THREE TIMES A DAY, 7-Days a week. Your item is guaranteed to be in the mail the SAME DAY you place your order. Transit time from California is 2-4 days throughout the USA. Our bottles are made of sturdy polypropylene. We shrink-wrap the screw tops and seal the bottles in plastic to ensure a spill-free journey.
PCB (Printed Circuit Board) Etchant Dry Powder 4 Oz SHIPS FAST from USA
PCB Etchant Texture: Dry Powder Grade: Ultra-Pure 99.9% Dry Weight: 4 Ounces Volume: 4 Fluid Ounces The item for sale is 4 Ounces (by weight) of Printed Circuit Board (PCB) Etchant. Mixed with water, 4 Ounces makes 16 Fluid Ounces (473 mL) of Etching Solution; which will etch approximately 280 square inches of single-sided circuit board (with average coverage). Use ground planes to make most efficient use of the etchant and better circuits. NOTE: This is NOT Ferric Chloride solution. This is colorless and odorless non-staining oxygenating etchant. It is much safer than Ferric Chloride (does not produce Chlorine or any fumes whatsoever—save for a tiny amount of pure Oxygen as it etches). FREE EXPEDITED SHIPPING! Item ships in a 4-fluid ounce HDPE plastic screw-top bottle. The screw top is shrink-wrapped and the bottle is sealed in plastic to ensure a spill-free journey. Ships FAST (Always the SAME DAY) from California (2-4 days transit time throughout the USA). SUGGESTED USE: As the etchant dissolves the Copper from the board it will turn a light green but the solution remains perfectly clear and you can easily view the circuit board to monitor the etching progress. This is much better than Ferric Chloride which turns opaque brown / black very quickly. This product is also faster than Ferric Chloride at all temperatures; and requires little or no agitation. Etching time varies with temperature but is usually 5-15 minutes. This product works best (Fastest) at 122 Degrees Fahrenheit (50 degrees Centigrade) but will work at room temperature almost as fast. No heaters or water bath needed. This product produces small bubbles of Oxygen as it works, when etching both sides of a double sided board it is advisable to flip the board occasionally to avoid the buildup of bubbles on the underside of the board which may slow the etching process in the area where the bubble accumulates, Etching double-sided boards vertically is also a solution. The mix ratio is very tolerant, and does not need to be exact; it is advisable to mix just what you need for a board in small amounts at a time for maximum efficiency. If the solution becomes exhausted, add a tiny amount of the powder to finish the job. The solution will keep for a few days after being mixed but will lose some of its power to dissolve metal over time. Store any unused etchant outdoors in a plastic bottle with a vent to prevent buildup of oxygen. Spent solution can be neutralized with Baking Soda (Sodium Bicarbonate). The spent solution contains Copper Sulfate.
PCB (Printed Circuit Board) Etchant Dry Powder 4 Oz SHIPS FAST from USA
PCB Etchant Texture: Dry Powder Grade: Ultra-Pure 99.9% Dry Weight: 4 Ounces Volume: 4 Fluid Ounces The item for sale is 4 Ounces (by weight) of Printed Circuit Board (PCB) Etchant. Mixed with water, 4 Ounces makes 16 Fluid Ounces (473 mL) of Etching Solution; which will etch approximately 280 square inches of single-sided circuit board (with average coverage). Use ground planes to make most efficient use of the etchant and better circuits. NOTE: This is NOT Ferric Chloride solution. This is colorless and odorless non-staining oxygenating etchant. It is much safer than Ferric Chloride (does not produce Chlorine or any fumes whatsoever—save for a tiny amount of pure Oxygen as it etches). FREE EXPEDITED SHIPPING! Item ships in a 4-fluid ounce HDPE plastic screw-top bottle. The screw top is shrink-wrapped and the bottle is sealed in plastic to ensure a spill-free journey. Ships FAST (Always the SAME DAY) from California (2-4 days transit time throughout the USA). SUGGESTED USE: As the etchant dissolves the Copper from the board it will turn a light green but the solution remains perfectly clear and you can easily view the circuit board to monitor the etching progress. This is much better than Ferric Chloride which turns opaque brown / black very quickly. This product is also faster than Ferric Chloride at all temperatures; and requires little or no agitation. Etching time varies with temperature but is usually 5-15 minutes. This product works best (Fastest) at 122 Degrees Fahrenheit (50 degrees Centigrade) but will work at room temperature almost as fast. No heaters or water bath needed. This product produces small bubbles of Oxygen as it works, when etching both sides of a double sided board it is advisable to flip the board occasionally to avoid the buildup of bubbles on the underside of the board which may slow the etching process in the area where the bubble accumulates, Etching double-sided boards vertically is also a solution. The mix ratio is very tolerant, and does not need to be exact; it is advisable to mix just what you need for a board in small amounts at a time for maximum efficiency. If the solution becomes exhausted, add a tiny amount of the powder to finish the job. The solution will keep for a few days after being mixed but will lose some of its power to dissolve metal over time. Store any unused etchant outdoors in a plastic bottle with a vent to prevent buildup of oxygen. Spent solution can be neutralized with Baking Soda (Sodium Bicarbonate). The spent solution contains Copper Sulfate.
PCB (Printed Circuit Board) Etchant Dry Powder 5 Oz SHIPS FAST from USA
15.00 PCB Etchant Texture: Dry Powder Grade: Ultra-Pure 99.9% Dry Weight: 5 Ounces (140 Grams) Volume: 4 Fluid Ounces The item for sale is 5 Ounces of Printed Circuit Board (PCB) Etchant. Mixed with water, 5 Ounces makes 18.6 Fluid Ounces (550.07 mL) of Etching Solution; which will etch approximately 350 square inches of single-sided circuit board (with average coverage). Use ground planes to make most efficient use of the etchant and better circuits. NOTE: This is NOT Ferric Chloride solution. This is colorless and odorless non-staining oxygenating etchant. It is much safer than Ferric Chloride (does not produce Chlorine or any fumes whatsoever—save for a tiny amount of pure Oxygen as it etches). FREE EXPEDITED SHIPPING! Item ships in a 4-fluid ounce HDPE plastic screw-top bottle. The screw top is shrink-wrapped and the bottle is sealed in plastic to ensure a spill-free journey. Ships FAST (Always the SAME DAY) from California (2-4 days transit time throughout the USA). SUGGESTED USE: As the etchant dissolves the Copper from the board it will turn a light green but the solution remains perfectly clear and you can easily view the circuit board to monitor the etching progress. This is much better than Ferric Chloride which turns opaque brown / black very quickly. This product is also faster than Ferric Chloride at all temperatures; and requires little or no agitation. Etching time varies with temperature but is usually 5-15 minutes. This product works best (Fastest) at 122 Degrees Fahrenheit (50 degrees Centigrade) but will work at room temperature almost as fast. No heaters or water bath needed. This product produces small bubbles of Oxygen as it works, when etching both sides of a double sided board it is advisable to flip the board occasionally to avoid the buildup of bubbles on the underside of the board which may slow the etching process in the area where the bubble accumulates, Etching double-sided boards vertically is also a solution. The mix ratio is very tolerant, and does not need to be exact; it is advisable to mix just what you need for a board in small amounts at a time for maximum efficiency. If the solution becomes exhausted, add a tiny amount of the powder to finish the job. The solution will keep for a few days after being mixed but will lose some of its power to dissolve metal over time. Store any unused etchant outdoors in a plastic bottle with a vent to prevent buildup of oxygen. Spent solution can be neutralized with Baking Soda (Sodium Bicarbonate). The spent solution contains Copper Sulfate. Normal 0 false false false EN-US X-NONE X-NONE
PCB (Printed Circuit Board) Etchant Dry Powder 5 Oz SHIPS FAST from USA
15.00 PCB Etchant Texture: Dry Powder Grade: Ultra-Pure 99.9% Dry Weight: 5 Ounces (140 Grams) Volume: 4 Fluid Ounces The item for sale is 5 Ounces of Printed Circuit Board (PCB) Etchant. Mixed with water, 5 Ounces makes 18.6 Fluid Ounces (550.07 mL) of Etching Solution; which will etch approximately 350 square inches of single-sided circuit board (with average coverage). Use ground planes to make most efficient use of the etchant and better circuits. NOTE: This is NOT Ferric Chloride solution. This is colorless and odorless non-staining oxygenating etchant. It is much safer than Ferric Chloride (does not produce Chlorine or any fumes whatsoever—save for a tiny amount of pure Oxygen as it etches). FREE EXPEDITED SHIPPING! Item ships in a 4-fluid ounce HDPE plastic screw-top bottle. The screw top is shrink-wrapped and the bottle is sealed in plastic to ensure a spill-free journey. Ships FAST (Always the SAME DAY) from California (2-4 days transit time throughout the USA). SUGGESTED USE: As the etchant dissolves the Copper from the board it will turn a light green but the solution remains perfectly clear and you can easily view the circuit board to monitor the etching progress. This is much better than Ferric Chloride which turns opaque brown / black very quickly. This product is also faster than Ferric Chloride at all temperatures; and requires little or no agitation. Etching time varies with temperature but is usually 5-15 minutes. This product works best (Fastest) at 122 Degrees Fahrenheit (50 degrees Centigrade) but will work at room temperature almost as fast. No heaters or water bath needed. This product produces small bubbles of Oxygen as it works, when etching both sides of a double sided board it is advisable to flip the board occasionally to avoid the buildup of bubbles on the underside of the board which may slow the etching process in the area where the bubble accumulates, Etching double-sided boards vertically is also a solution. The mix ratio is very tolerant, and does not need to be exact; it is advisable to mix just what you need for a board in small amounts at a time for maximum efficiency. If the solution becomes exhausted, add a tiny amount of the powder to finish the job. The solution will keep for a few days after being mixed but will lose some of its power to dissolve metal over time. Store any unused etchant outdoors in a plastic bottle with a vent to prevent buildup of oxygen. Spent solution can be neutralized with Baking Soda (Sodium Bicarbonate). The spent solution contains Copper Sulfate. Normal 0 false false false EN-US X-NONE X-NONE
1 LB Pure Graphite Powder 99.9% ACS Grade – Lubricant, Paint, Reagent, & More!
In fireworks production, graphite powder is used for several purposes. It is commonly used for glazing black powder grains to improve their flow and consistency. It improves the flow and consistency of black powder grains, making them easier to work with.
Calcium Hydroxide 2 Oz ACS Reagent Grade Fine Powder USA SELLER
Calcium Hydroxide Texture:Fine PowderGrade:ACS ReagentWeight:2 OuncesCAS#:1305-62-0The item for sale is 2 Ounces (by weight) of Calcium Hydroxide.NOTE: Calcium Hydroxide is caustic and can cause burns.Free Expedited Shipping:Item ships in 1 HDPE plastic screw-top bottle. The screw top is shrink-wrapped and the bottle is sealed in plastic to ensure a spill-free journey. Ships FAST (always the SAME DAY) from California (2-4 day transit time throughout the USA).Hundreds of Uses:•CO2 Test Solution• Water Treatment “Flocculent”• Calcium Soap Production• Whitewash Mortar• Lye-Less Hair Relaxer• Hair Remover• Paint Pigment• Tile Grout Filler• Acid Neutralizer• Aquarium pH Increaser• Coral Calcium Supplement• Sodium Hydroxide Substitute.
Butylated Hydroxytoluene 0.5 Oz USP Food Grade Fine Crystals USA SELLER
Butylated Hydroxytoluene Texture:Fine CrystalsGrade:USP FoodWeight:0.5 OuncesCAS#:128-37-0The item for sale is 0.5 Ounces (by weight) of Butylated Hydroxytoluene.Free Expedited Shipping:Item ships in 1 HDPE plastic screw-top bottle. The screw top is shrink-wrapped and the bottle is sealed in plastic to ensure a spill-free journey. Ships FAST (always the SAME DAY) from California (2-4 day transit time throughout the USA).Hundreds of Uses:•Food Additive (E321)• Antioxidant• Cosmetic Ingredient• Pharmaceuticals• Fuel Additive AO-29• Hydraulic Fluids• Turbine and Gear Oils• Jet Fuel Ingredient.
Cetyl Alcohol 8 Oz Total (2 Bottles) NF Food Grade Flake USA SELLER
Cetyl Alcohol Texture:FlakeGrade:NF FoodWeight:8 OuncesCAS#:36653-82-4The item for sale is 8 Ounces (by weight) of Cetyl Alcohol.Free Expedited Shipping:Item ships in 2 HDPE plastic screw-top bottles. The screw tops are shrink-wrapped and the bottles are sealed in plastic to ensure a spill-free journey. Ships FAST (always the SAME DAY) from California (2-4 day transit time throughout the USA).Hundreds of Uses:•Cosmetics• Opacifier• Emollient• Thickener• Lubricant• Cosurfactant.