Fale Conosco

(11) 99748-3977

Item Tag: SZ1620002001

Dental NO-MIX Self-Cure Orthodontic Brackets Braces Bonding Resin Adhesive Kit

Self-Cure Orthodontic Adhesive Kit(Standard)1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;Brushing: apply a thin layer of the primer over the etched enamel with the brusher;Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing.Packaging Detail:3 x black syringes (3.5g)1 x primer bottle (10ml)20 x BrushesSelf-Cure Orthodontic Adhesive Kit(Mini)Specifications: 1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;Brushing: apply a thin layer of the primer over the etched enamel with the brusher;Packaging Detail:1 x bottle（3ml）Primer1 x Syringes (3.5g each)Paste1x Syringes (2.5ml)etchant Gel7x Brushes1xSyringe tipSTORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use Payment We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don’t buy an item if you can’t/won’t pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation. Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Return If the item you received is damaged or defective,Please message to us immidately.We will free exchange or refund. We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges. You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Feedback You feedback is VERY important to usPlease leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Serivce is our #1 priority at BAISTRA!If you message us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right! On Jun 14, 2023 at 20:22:36 PDT, seller added the following information:

Dental Light Cure Lamp/Composite Resin /37% Acid Etching Gel /Bonding Adhesive

Resin Specifications: * Universal composite for anterior/posterior dentine and enamel * High radiopacity * Fluoride release * High strength (compressive strength>480MPa) INDICATIONS FOR USE: * Direct anterior and posterior restorations * Compatible with glass ionomer resin material * Cup buildup * Core buildup * Indirect anterior and posterior restorations including inlays, onlays and veneers Package Including: A2 Shade Composite Resin Color Available: A1, A2,A3, A3.5, B1 and B2 Bonding Adhesive Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: Pretreatment of caries and pulp protection. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. Apply a layer of adhesive evenly on the tooth surface with a small brush. Make the adhesive layer even as far as possible with the wind power of the air gun. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. Please use the composite resin filling material according to the original manufacturer’s instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor “phenolic substances”, which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. Acid Etching Gel 37% FEATURE： 1. Enamel and dentin etching. 2. Apply special technology to obtain ideal density of the gel. 3. Gel in blue color for better visual management. Indication: It is used for acid etching of tooth enamel and dentin before dental repair. Operation Procedure： 1. Remove surface dirt, rinse the prepared cavities, and blow dry. 2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation. 3. Rinse with clean water after acid etching, and suck out in time. 4. Use adhesives and resins for bonding repair. Dental Curing Light Lamp Product Description Parameter： Wavelength：440-480nm Light power：5W Intensity：800-1400mw/cm² Battery：Li-on 800mAh Input voltage：AC100-240V, 50/60Hz 0.4A Max Output voltage：DC 5V/1.5A Net Weight：155g Mode selection：P1, P2, P3 Solidification time：1S,3S,5S,10S,15S,20S Features: ·Produce the maximum light intensity safely. · A high intensity of 1400 mW/cm2. · Offers extremely short curing times of no more than 3 seconds. · Cordless, highly portable and light weight (only 155g). · High-performance Li-ion battery technology. · LED panel conveniently indicates a countdown curing time. · Battery can be fully recharged in 90 minutes. · Battery with protection against over-voltage, over-current and short circuit. · 3 versatile curing modes for every indications. · Automatic power off, low battery alert. · Color : White . Operation conditions: 1. Storage Condition: Temperature: +10℃+40℃ 2. Humidity: 30%-75% 3. Atmospheric pressure: 70KPa-106Kpa 4. Environment Conditions: Not near from fire equipment or flammability material. Packing list: The host * 1 Metal lamp holder *1 The silicone base *1 Power adapter *1 Disposable protective sleeve *1 Shade plate *1 Product specification *1 Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding! Payment We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance. Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal) Contact Us If you have any query or dissatisfaction, please contact our customer service via eBay Message Center only. If you contact us via eBay message, we’ll reply you within 24 working hours. Thank you so much for your purchase. Wish you have a nice day! : -)

Dental Light Cure Universal Composite Resin / Etching Gel /Bonding Adhesive

Bonding Adhesive Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: Pretreatment of caries and pulp protection. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. Apply a layer of adhesive evenly on the tooth surface with a small brush. Make the adhesive layer even as far as possible with the wind power of the air gun. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. Please use the composite resin filling material according to the original manufacturer’s instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor “phenolic substances”, which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. Acid Etching Gel 37% Phosphoric FEATURE： 1. Enamel and dentin etching. 2. Apply special technology to obtain ideal density of the gel. 3. Gel in blue color for better visual management. Indication: It is used for acid etching of tooth enamel and dentin before dental repair. Operation Procedure： 1. Remove surface dirt, rinse the prepared cavities, and blow dry. 2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation. 3. Rinse with clean water after acid etching, and suck out in time. 4. Use adhesives and resins for bonding repair. Dental Nano Composite Resin Flowable Light Cure Medium Flow Shade A1 A2 A3 INSTRUCTIONS： Preparation: isolate and prepare tooth. Cleaning: resin the preparation with water. Drying: gently air dry until there is no visible water. Do not allow enamel or dentin to dry for an excessive period of time. Applying.BOND Self-Etching Light Cure Adhesive(DSA): dispense 1-2 drops of DSA into a mixing well,apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied to much).Use a gentle stream of air to evaporate the solvent for 5 seconds(If using a non self-etching adhesive,an etching step should be used according to the manufacturer’s instruction) Cure: light cure for 20 seconds at 500±50mW/cm².Keep the distance to exposure surface less than 4 mm. Applying the Nano Flowable Light Cure Composite(FLC): place selected FLC into cavity preparation following by 20 seconds light cure.The depth of cure is about 2.5mm for 20 seconds cure.(In order to reduce shrinkage stress,for a large cavity, an increment filling is recommended.in general,1-2mm increments are placed into cavity preparation from different sides and the restoration is built incrementally.Each increment is light cured for 20 seconds.) For A2 and A3. Finishing: after light cure,adjust restoration. Polishing: use polishing strip or disc to polish the surface. WARNING: Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:dentaljoy City,State:SHENZHEN,China Telephone number:0755-67530378 Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding! Payment We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance. Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal) Contact Us If you have any query or dissatisfaction, please contact our customer service via eBay Message Center only. If you contact us via eBay message, we’ll reply you within 24 working hours. Thank you so much for your purchase. Wish you have a nice day! : -)

Dental Composite Resin Medium Flowable Light Cure/ Etching Gel /Bonding Adhesive

Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. The etchant rinse away cleanly and quickly, leaving no residue. Applying the Nano Flowable Light Cure Composite(FLC): place selected FLC into cavity preparation following by 20 seconds light cure.The depth of cure is about 2.5mm for 20 seconds cure.

Dental Composite Resin Medium Flowable Light Cure/ Etching Gel /Bonding Adhesive

Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. The etchant rinse away cleanly and quickly, leaving no residue. Applying the Nano Flowable Light Cure Composite(FLC): place selected FLC into cavity preparation following by 20 seconds light cure.The depth of cure is about 2.5mm for 20 seconds cure.

Dental Composite Resin Medium Flowable Light Cure/ Etching Gel /Bonding Adhesive

Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. The etchant rinse away cleanly and quickly, leaving no residue. Applying the Nano Flowable Light Cure Composite(FLC): place selected FLC into cavity preparation following by 20 seconds light cure.The depth of cure is about 2.5mm for 20 seconds cure.

Dental Composite Resin Medium Flowable Light Cure/ Etching Gel /Bonding Adhesive

Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. The etchant rinse away cleanly and quickly, leaving no residue. Applying the Nano Flowable Light Cure Composite(FLC): place selected FLC into cavity preparation following by 20 seconds light cure.The depth of cure is about 2.5mm for 20 seconds cure.